WDS Series Steam Moisture Separator
 |
HOW IT WORKS
Moisture-laden steam enters the inlet of the separator where it is deflected in a centrifugal downward motion. The entrained
moisture is separated out by reduction in velocity. Separated liquid then falls below the Vortex containment plate where it cannot be re-entrained. Dry, clean steam then flows upward and exits through the outlet of the separator.
FEATURES
- High efficiency: 99% of all particles 10 microns and larger
- Minimum pressure drop
- Gauge ports on 3” & 4” cast iron units
- Code constructed
SAMPLE SPECIFICATION
Steam Moisture Separator shall be “T” style for horizontal piping installations. Separator to be code constructed in cast iron or carbon steel and available in FNPT and flanged connections.
INSTALLATION
The WDS Steam Moisture Separator must be installed in a horizontal run of pipe. Exercise standard piping and structural
practices when installing this unit. Proper drainage of the separator utilizing a float and thermostatic steam trap is essential for proper operation.