WLDE Series Float Type Liquid Drain Trap
 |
HOW IT WORKS
This liquid drainer has a float-operated valve that gives the trap a modulating flow characteristic. The amount of liquid flowing into the drainer is sensed by the float which positions the main valve to discharge the liquid at the same rate as it is received.
FEATURES
- Ductile iron body and cover
- In-line repairable
- All stainless steel internals for long service life
- High capacity liquid removal
- Rugged construction design for heavy industrial use
SAMPLE SPECIFICATION
The liquid drain trap shall be float operated with a ductile iron body and all stainless steel internals. The unit shall be in-line
repairable and equipped with a FNPT threaded connection for the use of a balance line.
INSTALLATION
The installation should include isolation valves to facilitate maintenance and an in-line strainer. The trap must be level and
upright for the float mechanism to operate. The 2” and 2-1/2” traps should not be supported by the piping alone. Trap must be sized and properly located in the system. Piping hook-up must include an equalizing line.