FloBoss 504 Flow Manager
 |
The FloBoss has a weather-tight enclosure with a window for a LCD display protected by a weather shield cover. The enclosure contains a processor circuit board with built-in I/O along with mounting provisions for batteries, a radio, and optional I/O cards. Built-in I/O includes a Sensor Module (SM), a direct 4-wire RTD interface, and a discrete output capable of driving a sampler or odorizer.
The SM sensor accumulates single or dual pulse counts from the turbine meter (typically via a preamp) and performs error checking/correction.
In addition, the SM has a static pressure sensor and an optional auxiliary pressure sensor built into it.
Refer to Specification Sheet 3.3:SM.
The FloBoss 504 consists of the following components and features:
- A 32-bit main microprocessor, with 512KB of flash ROM and 512KB of static RAM storage.
- Pulse counters for sensing one or two pulse inputs from a turbine meter.
- Pressure sensors for measuring static pressure and optionally an auxiliary pressure.
- Built-in RTD input and discrete output.
- Extensive applications firmware.
- Weather-tight enclosure with covered display.
- Space for up to four 7-Amp-hour batteries.
- Operator interface port.
- Port for optional host communications card.
- Provision for optional I/O cards.