Instrumentation: Elpro
The wireless alternative to expensive cabling
The ELPRO 105 range of telemetry modules provide remote monitoring and control by radio or twisted-pair wire, over short or long distances. More Info 
Industrial Wireless Ethernet
Plug & Work with ELPRO 905U-E - Ethernet connectivity without the wiring. More Info
905U-G Wireless Gateway
Wireless connectivity between different data buses - Profibus, Ethernet, Modbus, DF1, DeviceNet, Modbus Plus. More Info
Wireless Profibus DP - ELPRO 905U-G-PR
Wireless Profibus DP interface, to 12Mbit/sec. Uses 900MHz license-free radio band. Up to 20 miles line-of-sight, 3000 feet in congested industrial environments. Also 450MHz 5W licensed radio, 30 miles More Info
Remote Monitoring by Radio - ELPRO 905U-K
The 905U-K wireless I/O module is an economical solution for the remote monitoring of process signals. More Info
The wireless alternative to expensive cabling - ELPRO 905U
The ELPRO 905U range of wireless I/O provides a low cost alternative to expensive signal wire installations, over short or long distances. More Info
105U-G Wireless Gateway
Wireless connectivity between different data buses - Profibus, Ethernet, Modibus, DF1, Devicenet, Modibus Plus More Info
Remote Monitoring by Radio - ELPRO 505U-K
The 505U-K wireless I/O module is an economical solution for the remote monitoring of process signals. More Info
DEMO-905
The DEMO-905 has been designed to demonstrate the 905U telemetry modules in a customer environment. This is a fully working demonstration that simulates radio control of a tank system. More Info
YU6/900
The YU6/900 6 element Yagi antenna is made for use with the ELPRO 900 series telemetry products. More Info
YU16/900
The YU16/900 16 element Yagi antenna is made for use with the ELPRO 900 series telemetry products. More Info
Antenna CFD890EL
The CFD890EL ground independent half wave dipole may be used for external or internal mounting. More Info
CC900TAIL
The CC900TAIL is a 24%u201D (800mm) RG58 coaxial lead. The tail is terminated with a SMA (male) connector for module connection and a flanged N-Type (female) bulkhead connector. More Info
CC10/900 and CC20/900
The ELPRO antenna coaxial extender kits are designed for use with the ELPRO 900 series telemetry modules. More Info
SER905
The SER905 serial configuration lead is ideal for programming the ELPRO 900 series modules.
More Info
Bracket Yagi Kit
The Yagi antenna requires a single mounting bracket. The bracket assembly consists of 1xU-Bolt 1xD-plate with nuts and washers. The brackets are zinc plated mild steel. More Info
Bracket Collinear Kit
The Collinear antenna requires two mounting brackets to hold the antenna in position. More Info
Emergency Shower & Eyewash Stations
Wireless applications for monitoring and alarm notification. More Info
Converting 16 bit unsigned integers to a Floating Point Number For Allen-Bradley SLC500 PLC's
The purpose of this document is to provide RS Logix programming code for SLC-500 PLC%u2019s to purposefully understand an analogue input variable, that using a 105U, 105S-1, 2 or a 905U, 905S-1, 2 analogue input, radio linked to a 105U-G- (DF1) or 905U-G-(DF1) then to serial connection to SLC-500 using the DF1 protocol. More Info
Profibus DP Slave Wireless Gateway (105U-G / 905U-G) and Siemens S7300 PLC's
The purpose of this document is to illustrate an application setup using a Siemens S7%u2013300 PLC communicating via Profibus to an Elpro 105U/905U-G-PR1 module. More Info
905G DeviceNet Application Note
The following document details the connection of a 905U-G-DE1 (DeviceNet Slave) to a Rockwell Automation SLC 5/04 PLC and 1747-SDN Scanner. More Info
DG900
The DG900 whip antenna is made for use with the ELPRO 900 series telemetry products. More Info
Remote Monitoring by Radio - ELPRO 505U
The 505U radio telemetry module is an economical solution for the remote monitoring of process signals. More Info
