ROC809 Remote Operations Controller

The ROC809 Remote Operations Controller is microprocessor-based controller that provides the functions required for a variety of field automation applications. The ROC809 is used primarily where there is a need to monitor, measure, and control equipment in a remote environment. The ROC809 controller is ideal for any applications requiring flow computation; Proportional, integral, and Derivative (PID) control loops; and logic sequencing control on up to 12 meter runs. More Info

Power Input Modules (for ROC800-Series)

The ROC800-Series Remote Operations Controllers 
are microprocessor-based measurement and control 
devices that provide the functions required for a 
variety of field automation applications. The 
ROC809 has a backplane to which the Central 
Processing Unit (CPU), Power Input Module, 
Input/Output (I/O) modules, and communication 
modules connect. More Info

AI and AO Modules (ROC800-Series)

Analog Input (AI) and Analog Output (AO) modules 
for the ROC800-Series Remote Operations 
Controller provide the ROC with the ability to 
monitor and control various analog field values. More Info

DI and PI Modules (ROC800-Series)

Discrete Input (DI) and Pulse Input (PI) modules for 
the ROC800-Series Remote Operations Controller 
provide the ROC with the ability to monitor various 
discrete and pulse input field values. The maximum 
number of modules that a ROC809 can support is 
nine. More Info

DO and DOR Modules (ROC800-Series)

Discrete Output (DO) and Discrete Output Relay 
(DOR) modules for the ROC800-Series Remote 
Operations Controller provide the ROC with the ability 
to control various discrete output field devices. The 
maximum number of modules that a ROC809 can 
support is nine. More Info

HART Communication Module (ROC800-Series)

The HART Communication module allows a 
ROC800-Series Remote Operations Controller to 
communicate with HART devices using the Highway 
Addressable Remote Transducer (HART) protocol. 
The HART module can receive signals from and 
transmit signals to HART transmitters. More Info

GAS CHROMATOGRAPH USER PROGRAM

This program allows a ROC809 Remote Operations Controller to communicate with a Gas 
Chromatograph through an EIA-232 (RS-232) or EIA-485 (RS-485) communications port. The user 
program will allow communications with a Daniel 2251, 2255, 2350, 2350A or 2360 Gas 
Chromatograph or with a ABB Totalflow Model 8000 BTU Gas Chromatograph. The ROC809 unit will 
be the Master using the Modbus Master protocol. More Info

Communication Modules (ROC800-Series)

Communication modules add communication ports 
to a ROC800-Series Remote Operations 
Controllers. The Central Processor Unit (CPU) of a 
ROC800-Series provides three built-in 
communication ports. Refer to Specifications Sheet 
6:ROC809. A maximum of three communication 
modules can be added, resulting in a maximum of 
six communication ports per ROC809 unit. More Info

ROC800-Series Operating System Firmware

The ROC800-Series Operating System Firmware 
provides the functionality for the ROC800-Series 
controllers. More Info

V-CONE METERING USER PROGRAM

This program allows a ROC809 Remote Operations Controller to calculate a corrected volumeteric flow  
rate at a specified base pressure and temperature for a McCrometer V-Cone flowmeter.  
The V-Cone calculation is very similar to an orifice plate calculation, uses many of the same configuration  
parameters, and produces many of the same calculated values. More Info

ROC312 Remote Operations Controller

The ROC312 Remote Operations Controller (ROC) is a  
microprocessor-based controller that provides the  
functions required for a variety of field automation  
applications. The unit is used primarily where there is a need for remote monitoring, measurement, data archival, and control. The ROC312 is ideally suited to applications requiring flow computation, continuous and batch measurement calculations, PID control, and  
logic/sequencing control. More Info

ROC306 Remote Operations Controller

The ROC306 Remote Operations Controller (ROC) is a  
microprocessor-based controller that provides the  
functions required for a variety of field automation  
applications. The unit is used primarily where there is a  
need for remote monitoring, measurement, data archival, and control. The ROC306 is ideally suited to applications requiring flow computation, continuous and batch measurement calculations, PID control, and  
logic/sequencing control. More Info

RTD and T/C Modules (ROC800-Series)

Resistance Temperature Detector (RTD) and 
Thermocouple (T/C) Input modules for the ROC800- 
Series Remote Operations Controller provide the 
ROC with the ability to monitor various RTD or 
thermocouple sensors. The maximum number of 
modules that a ROC809 can support is nine. More Info

Analog Input Loop and Differential Modules

The Analog Input Loop and Analog Input Differential 
modules plug into a ROC300-Series Remote 
Operations Controller or FloBossTM 407 Flow Manager 
and are used for monitoring current loop and voltage 
output devices. Each module can accommodate one 
analog input, and each uses a scaling resistor for 
converting loop current to input voltage. More Info

Function Sequence Table Applications Software

The Function Sequence Table Applications Software 
adds analog and discrete sequencing control 
capability to Remote Operations Controllers (ROCs) 
and FloBoss%uF6DB Flow Managers. This programmable 
control is implemented in a Function Sequence Table 
(FST). Using a series of steps, the FST defines the 
actions to be performed by the ROC or FloBoss. More Info

DS800 Development Suite Software

DS800 Development Suite Software provides editors 
to build IEC 61131-3 compliant programs. The 
DS800 software can be used to develop programs, 
independently of ROCLINK%u2122 800 Configuration 
Software. These programs can be downloaded over 
the Ethernet port to a ROC800-Series Remote 
Operations Controller that has the optional license 
key installed. More Info